Barco UDM-4K22
The Barco UDM-4K22 has 6 inputs and 2 outputs: 2 × Ethernet, 2 × SERIAL, 1 × DisplayPort, 1 × HDBaseT.
Inputs and outputs
Ethernet (2)
| Port | Direction | Connector |
|---|
| Ethernet | In/out | RJ45 |
| Ethernet | In/out | RJ45 |
SERIAL (2)
| Port | Direction | Connector |
|---|
| RS-232 | In/out | D-Sub 9 |
| RS-232 | In/out | D-Sub 9 |
DisplayPort (1)
| Port | Direction | Connector |
|---|
| DP 1.2 In | In | DisplayPort |
HDBaseT (1)
| Port | Direction | Connector |
|---|
| HDBaseT In | In | RJ45 |
HDMI (1)
| Port | Direction | Connector |
|---|
| HDMI 2.0 In | In | HDMI |
Power (1)
| Port | Direction | Connector |
|---|
| AC Power | In | IEC C13/C14 |
Specs
- Category
- Projector
- Rack units
- 8U
- Dimensions
- H 339 mm × W 725 mm × D 540 mm
- Weight
- 48 kg
- Power consumption
- 2400 W
- Heat output
- 8189 BTU/h (from power consumption)
What it connects to
- Ethernet out: 1,144 devices in the library take it as an input.
- HDMI in: 592 devices in the library can feed it.
- HDBaseT in: 497 devices in the library can feed it.
- Ethernet in: 497 devices in the library can feed it.
- DisplayPort in: 147 devices in the library can feed it.
- Power in: 86 devices in the library can feed it.
Use the Barco UDM-4K22 in a diagram
Add it from the library with these ports, connect it, and Patchify numbers the cables and builds the schedule, labels and rack.
Start your free trial30-day free trial. No credit card needed.
Port data from the Patchify gear library. Manufacturer page · Report a correction