Barco HDX-W20 Flex
The Barco HDX-W20 Flex has 7 inputs and 2 outputs: 2 × Ethernet, 2 × SDI, 2 × SERIAL, 1 × HDMI.
Inputs and outputs
Ethernet (2)
| Port | Direction | Connector |
|---|
| Ethernet | In/out | RJ45 |
| Ethernet | In/out | RJ45 |
SDI (2)
| Port | Direction | Connector |
|---|
| SDI In 1 | In | BNC |
| SDI In 2 | In | BNC |
SERIAL (2)
| Port | Direction | Connector |
|---|
| RS-232 | In/out | D-Sub 9 |
| RS-232 | In/out | D-Sub 9 |
HDMI (1)
| Port | Direction | Connector |
|---|
| DVI-D In | In | DVI |
Power (1)
| Port | Direction | Connector |
|---|
| AC Power | In | IEC C13/C14 |
VGA (1)
| Port | Direction | Connector |
|---|
| VGA In (5-BNC) | In | BNC |
Specs
- Category
- Projector
- Rack units
- 9U
- Dimensions
- H 382 mm × W 475 mm × D 725 mm
- Weight
- 49.9 kg
- Power consumption
- 2200 W
- Heat output
- 7506 BTU/h (from power consumption)
What it connects to
- Ethernet out: 1,144 devices in the library take it as an input.
- HDMI in: 592 devices in the library can feed it.
- Ethernet in: 497 devices in the library can feed it.
- SDI in: 392 devices in the library can feed it.
- Power in: 86 devices in the library can feed it.
- SERIAL out: 26 devices in the library take it as an input.
Use the Barco HDX-W20 Flex in a diagram
Add it from the library with these ports, connect it, and Patchify numbers the cables and builds the schedule, labels and rack.
Start your free trial30-day free trial. No credit card needed.
Port data from the Patchify gear library. Manufacturer page · Report a correction