Sennheiser EW-DX EM 4 Dante
The Sennheiser EW-DX EM 4 Dante has 4 inputs and 7 outputs: 4 × Analog Audio, 4 × Dante, 2 × Ethernet, 1 × Power.
Inputs and outputs
Analog Audio (4)
| Port | Direction | Connector |
|---|---|---|
| Analog Out 1 | Out | XLR 3-Pin |
| Analog Out 2 | Out | XLR 3-Pin |
| Analog Out 3 | Out | XLR 3-Pin |
| Analog Out 4 | Out | XLR 3-Pin |
Dante (4)
| Port | Direction | Connector |
|---|---|---|
| Dante 1 | In/out | RJ45 |
| Dante 2 | In/out | RJ45 |
| Dante 1 | In/out | RJ45 |
| Dante 2 | In/out | RJ45 |
Ethernet (2)
| Port | Direction | Connector |
|---|---|---|
| Ethernet | In/out | RJ45 |
| Ethernet | In/out | RJ45 |
Power (1)
| Port | Direction | Connector |
|---|---|---|
| AC Power | In | IEC C13/C14 |
Specs
- Category
- Wireless
- Rack units
- 1U
- Dimensions
- H 44 mm × W 483 mm × D 373 mm
- Weight
- 4.6 kg
- Power consumption
- 37 W
- Heat output
- 126 BTU/h (from power consumption)
What it connects to
- Analog Audio out: 1,153 devices in the library take it as an input.
- Dante out: 1,144 devices in the library take it as an input.
- Ethernet out: 1,144 devices in the library take it as an input.
- Dante in: 497 devices in the library can feed it.
- Ethernet in: 497 devices in the library can feed it.
- Power in: 86 devices in the library can feed it.
Use the Sennheiser EW-DX EM 4 Dante in a diagram
Add it from the library with these ports, connect it, and Patchify numbers the cables and builds the schedule, labels and rack.
Start your free trial30-day free trial. No credit card needed.
Related devices
Port data from the Patchify gear library. Manufacturer page · Report a correction