Riedel Bolero
The Riedel Bolero has 6 inputs and 5 outputs: 4 × Dante, 2 × AES3, 2 × Analog Audio, 2 × Ethernet.
Inputs and outputs
Dante (4)
| Port | Direction | Connector |
|---|
| Dante Primary | In/out | RJ45 |
| Dante Secondary | In/out | RJ45 |
| Dante Primary | In/out | RJ45 |
| Dante Secondary | In/out | RJ45 |
AES3 (2)
| Port | Direction | Connector |
|---|
| AES In | In | XLR 3-Pin |
| AES Out | Out | XLR 3-Pin |
Analog Audio (2)
| Port | Direction | Connector |
|---|
| 4-Wire In | In | XLR 3-Pin |
| 4-Wire Out | Out | XLR 3-Pin |
Ethernet (2)
| Port | Direction | Connector |
|---|
| Ethernet | In/out | RJ45 |
| Ethernet | In/out | RJ45 |
Power (1)
| Port | Direction | Connector |
|---|
| AC Power | In | IEC C13/C14 |
Specs
- Category
- Intercom
- Power consumption
- 30 W
- Heat output
- 102 BTU/h (from power consumption)
What it connects to
- Analog Audio in: 1,158 devices in the library can feed it.
- Analog Audio out: 1,152 devices in the library take it as an input.
- Dante out: 1,144 devices in the library take it as an input.
- Ethernet out: 1,144 devices in the library take it as an input.
- Dante in: 497 devices in the library can feed it.
- Ethernet in: 497 devices in the library can feed it.
Use the Riedel Bolero in a diagram
Add it from the library with these ports, connect it, and Patchify numbers the cables and builds the schedule, labels and rack.
Start your free trial30-day free trial. No credit card needed.
Port data from the Patchify gear library. Manufacturer page · Report a correction