Blackmagic Design GPI and Tally Interface
The Blackmagic Design GPI and Tally Interface has 3 inputs and 2 outputs: 4 × Ethernet, 1 × Power.
Inputs and outputs
Ethernet (4)
| Port | Direction | Connector |
|---|---|---|
| Ethernet In | In/out | RJ45 |
| Ethernet Loop | In/out | RJ45 |
| Ethernet In | In/out | RJ45 |
| Ethernet Loop | In/out | RJ45 |
Power (1)
| Port | Direction | Connector |
|---|---|---|
| AC Power | In | IEC C13/C14 |
Specs
- Category
- Controller
- Rack units
- 1U
- Dimensions
- H 65 mm × W 145 mm × D 139 mm
- Weight
- 0.4 kg
- Power consumption
- 5 W
- Heat output
- 17 BTU/h (from power consumption)
What it connects to
- Ethernet out: 1,144 devices in the library take it as an input.
- Ethernet in: 497 devices in the library can feed it.
- Power in: 86 devices in the library can feed it.
Use the Blackmagic Design GPI and Tally Interface in a diagram
Add it from the library with these ports, connect it, and Patchify numbers the cables and builds the schedule, labels and rack.
Start your free trial30-day free trial. No credit card needed.
Related devices
- Blackmagic Design ATEM 4 M/E Advanced Panel
- Blackmagic Design ATEM 1 M/E Advanced Panel
- Blackmagic Design Micro Converter BiDirectional SDI/HDMI 3G
- Blackmagic Design DeckLink IP 100G
- Blackmagic Design HyperDeck Studio HD Plus
- Blackmagic Design Teranex Express
- Blackmagic Design ATEM 2 M/E Constellation 4K
- Blackmagic Design Micro Converter BiDirectional SDI/HDMI 12G
Port data from the Patchify gear library. Manufacturer page · Report a correction